Sawing machines

request information
We specialize in the design and manufacture of band and circular sawing machines that meet the most various needs in forming and chip removal fields of ferrous and non-ferrous materials.

Moreover, our R&D team is at your disposal to find the most suitable solutions for both cutting and material handling.
PH 211-1 | © MEP S.p.A. - Circular and band sawing machines to cut metals

PH 211-1

MANUAL BAND SAWING MACHINE

PH 211-1, manual pull-down band sawing machine to cut metals mitering from 0° to +60°, provided either in a single-phase or three-phase version. 

The three-phase sawing machine version is available in the HB version to perform, in addition to manual cutting, even single cuts without operator.

  • MITER CUTTING
  • Metals
  • Tubes, profiles and beams
PH 211-1 HB | © MEP S.p.A. - Circular and band sawing machines to cut metals

PH 211-1 HB

MANUAL BAND SAWING MACHINE

PH 211-1 HB, manual pull-down band sawing machine to cut metals from 0° to +60°, can perform, in addition to manual cutting, even single cuts without operator.

  • MITER CUTTING
  • Metals
  • Tubes, profiles and beams
PH 261-1 | © MEP S.p.A. - Circular and band sawing machines to cut metals

PH 261-1

MANUAL BAND SAWING MACHINE

PH 261-1, manual pull-down band sawing machine to cut metals mitering from 0° to +60°, also available in the HB version to perform, in addition to manual cutting, even single cuts without operator.

  • MITER CUTTING
  • Metals
  • Tubes, profiles and beams
PH 261-1 HB | © MEP S.p.A. - Circular and band sawing machines to cut metals

PH 261-1 HB

MANUAL BAND SAWING MACHINE

PH 261-1 HB, manual pull-down band sawing machine to cut metals mitering from 0° to +60°, can perform, in addition to manual cutting, even single cuts without operator.

  • MITER CUTTING
  • Metals
  • Tubes, profiles and beams
PH 262 | © MEP S.p.A. - Circular and band sawing machines to cut metals

PH 262

MANUAL BAND SAWING MACHINE

PH 262, manual pull-down band sawing machine to cut metals mitering from -45° to +60°, also available in the HB version to perform, in addition to manual cutting, even single cuts without operator

  • MITER CUTTING
  • Metals
  • Tubes, profiles and beams
PH 262 HB | © MEP S.p.A. - Circular and band sawing machines to cut metals

PH 262 HB

MANUAL BAND SAWING MACHINE

PH 262 HB, manual pull-down band sawing machine to cut metals mitering from -45° to +60°, can perform, in addition to manual cutting, even single cuts without operator

  • MITER CUTTING
  • Metals
  • Tubes, profiles and beams
SHARK 281 | © MEP S.p.A. - Circular and band sawing machines to cut metals

SHARK 281

MANUAL BAND SAWING MACHINE

SHARK 281, manual pull-down band sawing machine to cut metals mitering from 0° to +60°, also available in the CCS (Cutting Control System) version in order to also perform single cuts without operator. 

  • MITER CUTTING
  • Metals
  • Solid
SHARK 281 CCS | © MEP S.p.A. - Circular and band sawing machines to cut metals

SHARK 281 CCS

MANUAL BAND SAWING MACHINE

SHARK 281 CCS, manual pull-down band sawing machine to cut metals mitering from 0° to +60°, can also perform single cuts without operator. 

  • MITER CUTTING
  • Metals
  • Solid
SHARK 281 CCS MA | © MEP S.p.A. - Circular and band sawing machines to cut metals

SHARK 281 CCS MA

MANUAL BAND SAWING MACHINE

SHARK 281 CCS MA, manual pull-down band sawing machine to cut metals mitering from 0° to +60°, can also perform single cuts without operator. The vice opening/closing is performed by means of a hand operated valve.

  • MITER CUTTING
  • Metals
  • Solid
SHARK 282 | © MEP S.p.A. - Circular and band sawing machines to cut metals

SHARK 282

MANUAL BAND SAWING MACHINE

SHARK 282, manual pull-down band sawing machine to cut metals mitering from -45° to +60°, also available in the CCS (Cutting Control System) version in order to also perform single cuts without operator. 

  • MITER CUTTING
  • Metals
  • Solid
SHARK 282 CCS | © MEP S.p.A. - Circular and band sawing machines to cut metals

SHARK 282 CCS

MANUAL BAND SAWING MACHINE

SHARK 282 CCS, manual pull-down band sawing machine to cut metals mitering from -45° to +60°, can also perform single cuts without operator. 

  • MITER CUTTING
  • Metals
  • Solid
SHARK 282 CCS MA | © MEP S.p.A. - Circular and band sawing machines to cut metals

SHARK 282 CCS MA

MANUAL BAND SAWING MACHINE

SHARK 282 CCS MA, manual pull-down band sawing machine to cut metals mitering from -45° to +60°, can also perform single cuts without operator. The vice opening/closing is performed by means of a hand operated valve.

  • MITER CUTTING
  • Metals
  • Solid
SHARK 332-1 CCS | © MEP S.p.A. - Circular and band sawing machines to cut metals

SHARK 332-1 CCS

MANUAL BAND SAWING MACHINE

SHARK 332-1 CCS, band sawing machine to cut metals mitering from -45° to +60°. In addition to the manual pull-down mode, it can also perform single cuts without operator.  

  • MITER CUTTING
  • Metals
  • Solid
SHARK 281 SXI EVO | © MEP S.p.A. - Circular and band sawing machines to cut metals

SHARK 281 SXI EVO

SEMI-AUTOMATIC BAND SAWING MACHINE

SHARK 281 SXI EVO, electrohydraulic semi-automatic band sawing machine to cut metals mitering from 0° to +60°. Upon request, in addition to the semi-automatic cycle, it can be ordered equipped with the semi-automatic/dynamic and manual pull-down modes.

  • MITER CUTTING
  • Metals
  • Solid
SHARK 282 SXI EVO | © MEP S.p.A. - Circular and band sawing machines to cut metals

SHARK 282 SXI EVO

SEMI-AUTOMATIC BAND SAWING MACHINE

SHARK 282 SXI EVO, electrohydraulic semi-automatic band sawing machine to cut metals mitering from -45° to +60°. In addition to the semi-automatic cycle, it can also operate with manual and semi-automatic/dynamic modes. 

  • MITER CUTTING
  • Metals
  • Solid
SHARK 332-1 SXI EVO | © MEP S.p.A. - Circular and band sawing machines to cut metals

SHARK 332-1 SXI EVO

SEMI-AUTOMATIC BAND SAWING MACHINE

SHARK 332-1 SXI EVO, electrohydraulic semi-automatic band sawing machine to cut metals mitering from -45° to +60°. In addition to the semi-automatic cycle, it can also operate in manual and semi-automatic/dynamic modes. 

  • MITER CUTTING
  • Metals
  • Solid
SHARK 382-1 SXI EVO | © MEP S.p.A. - Circular and band sawing machines to cut metals

SHARK 382-1 SXI EVO

SEMI-AUTOMATIC BAND SAWING MACHINE

SHARK 382-1 SXI EVO, electrohydraulic semi-automatic band sawing machine to cut metals mitering from -45° to +60°. In addition to the semi-automatic cycle, it can also operate in manual and semi-automatic/dynamic modes

  • MITER CUTTING
  • Metals
  • Solid
SHARK 452-1 SXI EVO | © MEP S.p.A. - Circular and band sawing machines to cut metals

SHARK 452-1 SXI EVO

SEMI-AUTOMATIC BAND SAWING MACHINE

SHARK 452-1 SXI EVO, electrohydraulic semi-automatic band sawing machine to cut metal tubes, profiles and beams mitering from -60° to +60°. 

  • MITER CUTTING
  • Metals
  • Tubes, profiles and beams
SHARK 512 SXI EVO | © MEP S.p.A. - Circular and band sawing machines to cut metals

SHARK 512 SXI EVO

SEMI-AUTOMATIC BAND SAWING MACHINE

SHARK 512 SXI EVO, electrohydraulic semi-automatic band sawing machine to cut tubes, profiles and beams mitering from -60° to +60°. 

  • MITER CUTTING
  • Metals
  • Tubes, profiles and beams
SHARK 652 SXI H 5.0 | © MEP S.p.A. - Circular and band sawing machines to cut metals

SHARK 652 SXI H 5.0

SEMI-AUTOMATIC BAND SAWING MACHINE

SHARK 652 SXI H 5.0, dual-column electrohydraulic semi-automatic band sawing machine to cut tubes, profiles and beams mitering from -60° to +60°. In the optional AUTOMATIC POSITIONING mode, saw head mitering is executed automatically. 

  • MITER CUTTING
  • Metals
  • Tubes, profiles and beams
SHARK 652 SXI H 5.0 AUTO | © MEP S.p.A. - Circular and band sawing machines to cut metals

SHARK 652 SXI H 5.0 AUTO

SEMI-AUTOMATIC BAND SAWING MACHINE

SHARK 652 SXI H 5.0 - AUTOMATIC MITERING, dual-column electrohydraulic semi-automatic band sawing machine to cut tubes, profiles and beams mitering from -60° to +60° - the saw head mitering is executed automatically. 

  • MITER CUTTING
  • Metals
  • Tubes, profiles and beams
THOR 450 | © MEP S.p.A. - Circular and band sawing machines to cut metals

THOR 450

SEMI-AUTOMATIC BAND SAWING MACHINE

THOR 450, dual-column semi-automatic band sawing machine for 0° cuts of structural steels, with size up to 450x450 mm.

 

  • MITER CUTTING
  • Metals
  • Tubes, profiles and beams
THOR 560 | © MEP S.p.A. - Circular and band sawing machines to cut metals

THOR 560

SEMI-AUTOMATIC BAND SAWING MACHINE

THOR 560, dual-column semi-automatic band sawing machine for 0° cuts of structural steels, with size up to 560x560 mm.

  • MITER CUTTING
  • Metals
  • Tubes, profiles and beams
THOR 660 | © MEP S.p.A. - Circular and band sawing machines to cut metals

THOR 660

SEMI-AUTOMATIC BAND SAWING MACHINE

THOR 660, dual-column semi-automatic band sawing machine for 0° cuts of structural steels, with size up to 660x660 mm.

  • MITER CUTTING
  • Metals
  • Tubes, profiles and beams
THOR 860 | © MEP S.p.A. - Circular and band sawing machines to cut metals

THOR 860

SEMI-AUTOMATIC BAND SAWING MACHINE

THOR 860, dual-column semi-automatic band sawing machine for 0° cuts of structural steels, with size up to 860x860 mm.

  • MITER CUTTING
  • Metals
  • Tubes, profiles and beams
THOR 1020 | © MEP S.p.A. - Circular and band sawing machines to cut metals

THOR 1020

SEMI-AUTOMATIC BAND SAWING MACHINE

THOR 1020, dual-column semi-automatic band sawing machine for 0° cuts of structural steels, with size up to 1020x1020 mm.

  • MITER CUTTING
  • Metals
  • Tubes, profiles and beams
SHARK 281 NC 5.0 | © MEP S.p.A. - Circular and band sawing machines to cut metals

SHARK 281 NC 5.0

AUTOMATIC BAND SAWING MACHINES

SHARK 281 NC 5.0, electrohydraulic automatic band sawing machine to cut metals mitering from 0° to +60°. In addition to the automatic cutting cycle, it can also operate in manual, semi-automatic/dynamic and semi-automatic modes. 

  • MITER CUTTING
  • Metals
  • Solid
SHARK 331-1 NC 5.0 SPIDER | © MEP S.p.A. - Circular and band sawing machines to cut metals

SHARK 331-1 NC 5.0 SPIDER

AUTOMATIC BAND SAWING MACHINES

SHARK 331-1 NC 5.0 SPIDER, electrohydraulic automatic band sawing machine to cut metals mitering from 0° to +60°. In addition to the automatic cutting cycle, it can also operate in semi-automatic mode. 

  • MITER CUTTING
  • Metals
  • Solid
SHARK 332-1 NC 5.0 | © MEP S.p.A. - Circular and band sawing machines to cut metals

SHARK 332-1 NC 5.0

AUTOMATIC BAND SAWING MACHINES

SHARK 332-1 NC 5.0, electrohydraulic automatic band sawing machine to cut metals mitering from -45° to +60°. In addition to the automatic cutting cycle, it can also operate in manual, semi-automatic/dynamic and semi-automatic modes. 

  • MITER CUTTING
  • Metals
  • Solid
SHARK 332 RC KONNECT | © MEP S.p.A. - Circular and band sawing machines to cut metals

SHARK 332 RC KONNECT

AUTOMATIC BAND SAWING MACHINES

SHARK 332 RC KONNECT, automatic electromechanical pivot band sawing machine with controlled automatic rotation to cut iron tubes, profiles and beams from -60° to +60°. In addition to the automatic operating cycle, it can also operate in semi-automatic mode. 

  • MITER CUTTING
  • Metals
  • Tubes, profiles and beams
SHARK 230-1 NC HS 5.0 | © MEP S.p.A. - Circular and band sawing machines to cut metals

SHARK 230-1 NC HS 5.0

AUTOMATIC BAND SAWING MACHINES

SHARK 230-1 NC HS 5.0, dual-column electrohydraulic automatic band sawing machine for 0° cuts of structural, stainless and alloy steels, solids and profiles. In addition to the automatic cycle, it can also operate in semi-automatic mode.

  • MITER CUTTING
  • Metals
  • Solid
SHARK 350 NC HS 5.0 | © MEP S.p.A. - Circular and band sawing machines to cut metals

SHARK 350 NC HS 5.0

AUTOMATIC BAND SAWING MACHINES

SHARK 350 NC HS 5.0, dual-column electrohydraulic automatic band sawing machine for 0° cuts of structural, stainless and alloy steels, solids and profiles. In addition to the automatic cutting cycle, it can also operate in semi-automatic mode. 

  • MITER CUTTING
  • Metals
  • Solid
SHARK 350 CNC HS 4.0 | © MEP S.p.A. - Circular and band sawing machines to cut metals

SHARK 350 CNC HS 4.0

AUTOMATIC BAND SAWING MACHINES

SHARK 350 CNC HS 4.0, dual-column electromechanical automatic band sawing machine for 0° cuts of structural, stainless and alloy steels, solids and profiles. In addition to the automatic cutting cycle, it can also operate in semi-automatic mode. 

  • MITER CUTTING
  • Metals
  • Solid
SHARK 460 KONNECT | © MEP S.p.A. - Circular and band sawing machines to cut metals

SHARK 460 KONNECT

AUTOMATIC BAND SAWING MACHINES

SHARK 460 KONNECT, dual-column electromechanical automatic band sawing machine for 0° cuts of structural, stainless and alloy steels, solids and profiles. In addition to the automatic cutting cycle, it can also operate in semi-automatic mode. 

  • MITER CUTTING
  • Metals
  • Solid
SHARK 660 CNC HS 4.0 | © MEP S.p.A. - Circular and band sawing machines to cut metals

SHARK 660 CNC HS 4.0

AUTOMATIC BAND SAWING MACHINES

SHARK 660 CNC HS 4.0, dual-column electromechanical automatic band sawing machine for 0° cuts of structural, stainless and alloy steels, solids and profiles. In addition to the automatic cutting cycle, it can also operate in semi-automatic mode. 

  • MITER CUTTING
  • Metals
  • Solid
FALCON 352 | © MEP S.p.A. - Circular and band sawing machines to cut metals

FALCON 352

MANUAL CIRCULAR SAWING MACHINES

FALCON 352, manual pull-down sawing machine to cut metals mitering from -45° to +45°, which can be supplied with or without a steel base. 

Upon request, it can be supplied with a pneumatic vice (MA) and automatic clamping when the saw head is pulled down.

  • MITER CUTTING
  • Metals
  • Tubes, profiles and beams
FALCON 352 MA | © MEP S.p.A. - Circular and band sawing machines to cut metals

FALCON 352 MA

MANUAL CIRCULAR SAWING MACHINES

FALCON 352 MA, manual pull-down sawing machine to cut metals mitering from -45° to +45°, is supplied with a steel base and two speeds motor. 

Furthermore it is supplied with a pneumatic vice (MA) and automatic clamping when the saw head is pulled down.

  • MITER CUTTING
  • Metals
  • Tubes, profiles and beams
COBRA 352 MA | © MEP S.p.A. - Circular and band sawing machines to cut metals

COBRA 352 MA

MANUAL CIRCULAR SAWING MACHINES

COBRA 352 MA, manual pivoting sawing machine with hard-metal teeth blade to cut light alloys, aluminium profiles and solids mitering from -45° to +45°.

The saw head is vertically adjustable to also perfom cuts with head tilting from 0° to +45°. 

  • MITER CUTTING
  • Light alloys
  • Tubes, profiles and extruded profiles
COBRA 352 SX EVO | © MEP S.p.A. - Circular and band sawing machines to cut metals

COBRA 352 SX EVO

SEMI-AUTOMATIC CIRCULAR SAWING MACHINE

COBRA 352 SX EVO, electropneumatic semi-automatic pivot sawing machine with hard-metal teeth blade to cut light alloys, aluminium profiles and solids mitering from -45° to +45°.

  • MITER CUTTING
  • Light alloys
  • Tubes, profiles and extruded profiles
COBRA 352 NC 5.0 | © MEP S.p.A. - Circular and band sawing machines to cut metals

COBRA 352 NC 5.0

AUTOMATIC CIRCULAR SAWING MACHINES

COBRA 352 NC 5.0, electropneumatic automatic sawing machine with electrowelded hard-metal blade to cut light alloys, aluminium profiles and solids mitering from -45° to +45°.  

The saw head is vertically adjustable to also perfom cuts with head tilting from 0° to +45°. 

  • MITER CUTTING
  • Light alloys
  • Tubes, profiles and extruded profiles
TIGER 352 | © MEP S.p.A. - Circular and band sawing machines to cut metals

TIGER 352

MANUAL CIRCULAR SAWING MACHINES

TIGER 352, electropneumatic manual vertical circular sawing machine to cut metals mitering from -45° to +60°. Upon request, it is provided with a pneumatic vice (MA) manually activated through a switch.

  • MITER CUTTING
  • Metals
  • Tubes, profiles and beams
TIGER 352 MA | © MEP S.p.A. - Circular and band sawing machines to cut metals

TIGER 352 MA

MANUAL CIRCULAR SAWING MACHINES

TIGER 352 MA, electropneumatic manual vertical circular sawing machine to cut metals mitering from -45° to +60°, is provided with a pneumatic vice (MA) manually activated through a switch.

  • MITER CUTTING
  • Metals
  • Tubes, profiles and beams
TIGER 352 SX EVO | © MEP S.p.A. - Circular and band sawing machines to cut metals

TIGER 352 SX EVO

SEMI-AUTOMATIC CIRCULAR SAWING MACHINE

TIGER 352 SX EVO, electropneumatic semi-automatic vertical sawing machine with HSS disc to cut metals mitering from -45° to +60°.

  • MITER CUTTING
  • Metals
  • Tubes, profiles and beams
TIGER 372 SX EVO | © MEP S.p.A. - Circular and band sawing machines to cut metals

TIGER 372 SX EVO

SEMI-AUTOMATIC CIRCULAR SAWING MACHINE

TIGER 372 SX EVO, electropneumatic semi-automatic vertical sawing machine with HSS disc to cut metals mitering from -45° to +60°. 

  • MITER CUTTING
  • Metals
  • Tubes, profiles and beams
TIGER 352 NC 5.0 | © MEP S.p.A. - Circular and band sawing machines to cut metals

TIGER 352 NC 5.0

AUTOMATIC CIRCULAR SAWING MACHINES

TIGER 352 NC 5.0, electropneumatic automatic vertical circular sawing machine to cut metals mitering from -45° to +60°. In addition to the automatic cutting cycle, it can also operate in the semi-automatic mode.

  • MITER CUTTING
  • Metals
  • Tubes, profiles and beams
TIGER 372 CNC LR 4.0 | © MEP S.p.A. - Circular and band sawing machines to cut metals

TIGER 372 CNC LR 4.0

AUTOMATIC CIRCULAR SAWING MACHINES

TIGER 372 CNC LR 4.0, electropneumatic automatic circular sawing machine to cut steels mitering from -45° to +60°. In addition to the automatic cutting cycle, it can also operate in semi-automatic mode.
 

  • MITER CUTTING
  • Metals
  • Tubes, profiles and beams
TIGER 372 CNC LR 4.0 RC | © MEP S.p.A. - Circular and band sawing machines to cut metals

TIGER 372 CNC LR 4.0 RC

AUTOMATIC CIRCULAR SAWING MACHINES

TIGER 372 CNC LR 4.0 RC, electropneumatic automatic circular sawing machine to cut steels mitering from -45° to +60°. In addition to the automatic cutting cycle, it can also operate in semi-automatic mode.  

  • MITER CUTTING
  • Metals
  • Tubes, profiles and beams
TIGER 402 CNC HR 4.0 | © MEP S.p.A. - Circular and band sawing machines to cut metals

TIGER 402 CNC HR 4.0

AUTOMATIC CIRCULAR SAWING MACHINES

TIGER 402 CNC HR 4.0, electropneumatic automatic circular sawing machine to cut aluminium and light alloys mitering from -45° to +60°. In addition to the automatic cutting cycle, it can also operate in semi-automatic mode. 
 

  • MITER CUTTING
  • Light alloys
  • Tubes, profiles and extruded profiles
TIGER 402 CNC HR 4.0 RC | © MEP S.p.A. - Circular and band sawing machines to cut metals

TIGER 402 CNC HR 4.0 RC

AUTOMATIC CIRCULAR SAWING MACHINES

TIGER 402 CNC HR 4.0 RC, electropneumatic automatic circular sawing machine to cut aluminium and light alloys mitering from -45° to +60°. In addition to the automatic cutting cycle, it can also operate in semi-automatic mode.

  • MITER CUTTING
  • Light alloys
  • Tubes, profiles and extruded profiles
VELOCEX 65 | © MEP S.p.A. - Circular and band sawing machines to cut metals

VELOCEX 65

AUTOMATIC CIRCULAR SAWING MACHINE FOR HIGH-SPEED CUTTING

VELOCEX 65, automatic circular sawing machine for 0° high-speed cuts of steels and alloys. 

 

  • MITER CUTTING
  • Metals
  • Solid
VELOCEX 80 | © MEP S.p.A. - Circular and band sawing machines to cut metals

VELOCEX 80

AUTOMATIC CIRCULAR SAWING MACHINE FOR HIGH-SPEED CUTTING

VELOCEX 80, automatic circular sawing machine for 0° high-speed cuts of steels and alloys. 

  • MITER CUTTING
  • Metals
  • Solid
VELOCEX 100 | © MEP S.p.A. - Circular and band sawing machines to cut metals

VELOCEX 100

AUTOMATIC CIRCULAR SAWING MACHINE FOR HIGH-SPEED CUTTING

VELOCEX 100, automatic circular sawing machine for 0° high-speed cuts of steels and alloys. 

  • MITER CUTTING
  • Metals
  • Solid
VELOCEX 125 | © MEP S.p.A. - Circular and band sawing machines to cut metals

VELOCEX 125

AUTOMATIC CIRCULAR SAWING MACHINE FOR HIGH-SPEED CUTTING

VELOCEX 125, automatic circular sawing machine for 0° high-speed cuts of steels and alloys. 

  • MITER CUTTING
  • Metals
  • Solid
VELOCEX 150 | © MEP S.p.A. - Circular and band sawing machines to cut metals

VELOCEX 150

AUTOMATIC CIRCULAR SAWING MACHINE FOR HIGH-SPEED CUTTING

VELOCEX 150, automatic circular sawing machine for 0° high-speed cuts of steels and alloys. 

  • MITER CUTTING
  • Metals
  • Solid
VELOCEX 175 | © MEP S.p.A. - Circular and band sawing machines to cut metals

VELOCEX 175

AUTOMATIC CIRCULAR SAWING MACHINE FOR HIGH-SPEED CUTTING

VELOCEX 175, automatic circular sawing machine for 0° high-speed cuts of steels and alloys. 

  • MITER CUTTING
  • Metals
  • Solid