CAST-IRON STRUCTURE
Cast-iron structure of the saw head, cutting table and vice to absorb vibrations during the cut and ensure longer blade life.
Manual pull-down band sawing machine ideal for all cutting needs of the contemporary workshop
SHARK 282, manual pull-down band sawing machine to cut metals mitering from -45° to +60°, also available in the CCS (Cutting Control System) version in order to also perform single cuts without operator.
HEAVY-DUTY
> The double spring to handle the saw head ensures maximum rigidity of movement.
> The large working surface ensures stability and safety during the cut.
> The cast-iron slide for the blade tensioning ensures an easy regulation and a smooth sliding over time.
> The high flow pump for the coolant ensures a constant blade lubrication and cooling.
EXCEPTIONAL FLEXIBILITY
> The turning cutting table is assembled on a preloaded roller thrust bearing thus allowing an easy and smooth rotation at any angle and turning along with the saw head thus preventing to cut it through.
> The mechanical stops at -45°, 0°, +45° and +60° with locking device at all angles in between ensure the quick positioning of the saw head.
> The quick releasing clamping system allows to manually open/close the vice in an easy way.
> The clamping unit sliding longitudinally to the right and left of the saw head allows to safely perform even precise miter cuts.
> The pressure gauge for blade tensioning allows to keep it constantly monitored.
BOOK A DEMONSTRATION SESSION: TEST OUR SAWING MACHINES PERSONALLY AND DISCOVER ALL METAL CUTTING TECHNOLOGIES.
OUR TECHNICAL STAFF WILL BE READY TO GIVE YOU PERSONALIZED ADVICE ACCORDING TO YOUR NEEDS!
Cast-iron structure of the saw head, cutting table and vice to absorb vibrations during the cut and ensure longer blade life.
Adjustable and extremely wear-resistant hard metal blade-guide pads that ensure longer blade life and cutting stability.
The CCS system allows to perform single cuts without operator - Saw head down feed rate by gravity: the cutting of the material is executed in automatic mode once the operator starts the cycle.
0° | 250 mm | 220 mm | 280 x 220 mm |
+ 45° | 230 mm | 200 mm | 220 x 200 mm |
+ 60° | 120 mm | 80 mm | 140 x 80 mm |
- 45° | 200 mm | 170 mm | 200 x 140 mm |
Max. vice opening | 285 mm |
Band size | 2950 x 27 x 0.9 mm |
Blade motor power | 1.5 / 1.8 Kw - Three-phase |
Blade rotation speed | 36 / 72 m/min - 2 Speeds |