CAST-IRON STRUCTURE
Cast-iron structure of the saw head, cutting table and vice to absorb vibrations during the cut and ensure longer blade life.
The small size semi-automatic band sawing machine with big features
SHARK 282 SXI EVO, electrohydraulic semi-automatic band sawing machine to cut metals mitering from -45° to +60°. In addition to the semi-automatic cycle, it can also operate with manual and semi-automatic/dynamic modes.
MAXIMUM FLEXIBILITY
> The three working modes (manual, semi-automatic/dynamic and semi-automatic ones) allow to perform any kind of cut in the most efficient way.
> The main control with acustic commands is assembled on an articulated arm thus granting full control in all operating positions.
> The LCD display shows the status of the sawing machine and all its parameters thus allowing maximum control in real-time.
> Programming from the control panel also allows to adjust the saw head stroke limits according to the dimensions of the bars to cut.
> Mechanical stops at -45°, 0°, +45° and +60° with a locking device at all angles in between.
> The knurled steel jaws of the cutting vice allow an efficient and safe clamping even in the case of tube cutting.
USER-FRIENDLY
> The turning cutting table is assembled on a central pin and roller thrust bearing thus allowing an easy and smooth rotation at any angle and turning along with the saw head thus preventing to cut it through.
> Angles scale engraved on the turning table allows to easily perform precise cuts in perfect tolerance at any angle.
> The clamping unit sliding longitudinally to the right and left of the saw head allows to safely perform even precise miter cuts.
> The quick releasing clamping system allows to manually open/close the vice in an easy way.
> A user-friendly interface with display and mechanical buttons ensures a reliable, easy and intuitive programming.
BOOK A DEMONSTRATION SESSION: TEST OUR SAWING MACHINES PERSONALLY AND DISCOVER ALL METAL CUTTING TECHNOLOGIES.
OUR TECHNICAL STAFF WILL BE READY TO GIVE YOU PERSONALIZED ADVICE ACCORDING TO YOUR NEEDS!
Cast-iron structure of the saw head, cutting table and vice to absorb vibrations during the cut and ensure longer blade life.
Designed for a complete recovery of chips and coolant.
Hydraulic system to control both the vice and head down feed rate that grants a constant pressure during the cut according to the feed set by the operator.
0° | 250 mm | 220 mm | 280 x 220 mm |
+ 45° | 230 mm | 200 mm | 220 x 200 mm |
+ 60° | 120 mm | 80 mm | 140 x 80 mm |
- 45° | 200 mm | 170 mm | 200 x 140 mm |
Max. vice opening | 285 mm |
Band size | 2950 x 27 x 0.9 mm |
Blade motor power | 1.5 / 1.8 Kw - Three-phase |
Blade rotation speed | 36 / 72 m/min - 2 Speeds |