SHARK 332-1 SXI EVO

Request information

SHARK 332-1 SXI EVO, electrohydraulic semi-automatic band sawing machine to cut metals mitering from -45° to +60°. In addition to the semi-automatic cycle, it can also operate in manual and semi-automatic/dynamic modes. 

MAXIMUM FLEXIBILITY

> The three working modes (manual, semi-automatic/dynamic and semi-automatic ones) allow to perform any kind of cut in the most efficient way. 

> The main control with acustic commands is assembled on an articulated arm thus granting full control in all operating positions. 

> The LCD display shows the status of the sawing machine and all its parameters thus allowing maximum control in real-time.

> Programming from the control panel also allows to adjust the saw head stroke limits according to the dimensions of the bars to cut.  

> Mechanical stops at -45°, 0°, +45° and +60° with a locking device at all angles in between.

> The knurled steel jaws of the cutting vice allow an efficient and safe clamping even in the case of tube cutting. 

> The large working surface granting maximum cutting stability and safety is equipped with hardened steel plates which can be replaced in case of wear. 

 

USER-FRIENDLY

> The turning cutting table is assembled on a central pin and roller thrust bearing thus allowing an easy and smooth rotation at any angle and turning along with the saw head thus preventing to cut it through. 

> Angles scale engraved on the turning table allows to easily perform precise cuts in perfect tolerance at any angle.

> The quick releasing clamping system allows to manually open/close the vice in an easy way. 

> The clamping unit sliding longitudinally to the right and left of the saw head allows to safely perform even precise miter cuts. 

> The coolant flood underneath the cutting table avoids the accumulation of chips and downtimes during the chip removal. 

> A user-friendly interface with display and mechanical buttons ensures a reliable, easy and intuitive programming. 

 

 


 

BOOK A DEMONSTRATION SESSION: TEST OUR SAWING MACHINES PERSONALLY AND DISCOVER ALL METAL CUTTING TECHNOLOGIES.

OUR TECHNICAL STAFF WILL BE READY TO GIVE YOU PERSONALIZED ADVICE ACCORDING TO YOUR NEEDS!

 


 

SHARK 332-1 SXI EVO
SHARK 332-1 SXI EVO
  • CAST-IRON STRUCTURE

    Cast-iron structure of the saw head, cutting table and vice to absorb vibrations during the cut and ensure longer blade life. 

  • HYDRAULIC POSITIVE HEAD DOWN FEED RATE AND VICE CONTROL

    Hydraulic system to control both the vice and head down feed rate that grants a constant pressure during the cut according to the feed set by the operator. 

  • Technical data

     
    300 mm 250 mm 330 x 250 mm
    + 45° 260 mm 250 mm 260 x 200 mm
    + 60° 180 mm 170 mm 170 x 170 mm
    - 45° 240 mm 210 mm 240 x 160 mm

     

    Max. vice opening 335 mm

     

    Band size 3650 x 27 x 0.9 mm
    Blade motor power 1.5 / 1.8 Kw - Three-phase
    Blade rotation speed 40 / 80 m/min - 2 Speeds

     

    Cutting system to cut beams and bundles of metal tubes | © MEP S.p.A. - Circular and band sawing machines to cut metals

    Material handling system

    Our standard models have been designed and manufactured in order to offer maximum flexibility of use, so that they can change and transform over time, thus optimizing their use according to the nature of the operations of any sector and market around the world. DO OUR STANDARD MODELS NOT FULLY MEET YOUR NEEDS? Our team of experts will study and examine your needs, with evaluations also on site, to ensure optimal study and layout proposals that meet your most specific needs, even with custom models. Constantly updated on the latest industry news, our team will develop cutting-edge solutions by studying innovative formulas that are in line with the highest industry standards.
    Learn more