Sawing machines

PH 211-1, manual pull-down band sawing machine to cut metals mitering from 0° to +60°, provided either in a single-phase or three-phase version. 

The three-phase sawing machine version is available in the HB version to perform, in addition to manual cutting, even single cuts without operator.

PH 211-1 HB, manual pull-down band sawing machine to cut metals from 0° to +60°, can perform, in addition to manual cutting, even single cuts without operator.

PH 261-1, manual pull-down band sawing machine to cut metals mitering from 0° to +60°, also available in the HB version to perform, in addition to manual cutting, even single cuts without operator.

PH 261-1 HB, manual pull-down band sawing machine to cut metals mitering from 0° to +60°, can perform, in addition to manual cutting, even single cuts without operator.

PH 262, manual pull-down band sawing machine to cut metals mitering from -45° to +60°, also available in the HB version to perform, in addition to manual cutting, even single cuts without operator. 

PH 262 HB, manual pull-down band sawing machine to cut metals mitering from -45° to +60°, can perform, in addition to manual cutting, even single cuts without operator. 

SHARK 281, manual pull-down band sawing machine to cut metals mitering from 0° to +60°, also available in the CCS (Cutting Control System) version in order to also perform single cuts without operator. 

SHARK 281 CCS, manual pull-down band sawing machine to cut metals mitering from 0° to +60°, can also perform single cuts without operator. 

SHARK 281 CCS MA, manual pull-down band sawing machine to cut metals mitering from 0° to +60°, can also perform single cuts without operator. The vice opening/closing is performed by means of a hand operated valve.

SHARK 282, manual pull-down band sawing machine to cut metals mitering from -45° to +60°, also available in the CCS (Cutting Control System) version in order to also perform single cuts without operator. 

SHARK 282 CCS, manual pull-down band sawing machine to cut metals mitering from -45° to +60°, can also perform single cuts without operator. 

SHARK 282 CCS MA, manual pull-down band sawing machine to cut metals mitering from -45° to +60°, can also perform single cuts without operator. The vice opening/closing is performed by means of a hand operated valve.

SHARK 332-1 CCS, band sawing machine to cut metals mitering from -45° to +60°. In addition to the manual pull-down mode, it can also perform single cuts without operator.  

SHARK 281 SXI EVO, electrohydraulic semi-automatic band sawing machine to cut metals mitering from 0° to +60°. Upon request, in addition to the semi-automatic cycle, it can be ordered equipped with the semi-automatic/dynamic and manual pull-down modes.

SHARK 282 SXI EVO, electrohydraulic semi-automatic band sawing machine to cut metals mitering from -45° to +60°. In addition to the semi-automatic cycle, it can also operate with manual and semi-automatic/dynamic modes. 

SHARK 332-1 SXI EVO, electrohydraulic semi-automatic band sawing machine to cut metals mitering from -45° to +60°. In addition to the semi-automatic cycle, it can also operate in manual and semi-automatic/dynamic modes. 

SHARK 382-1 SXI EVO, electrohydraulic semi-automatic band sawing machine to cut metals mitering from -45° to +60°. In addition to the semi-automatic cycle, it can also operate in manual and semi-automatic/dynamic modes. 

SHARK 452-1 SXI EVO, electrohydraulic semi-automatic band sawing machine to cut metal tubes, profiles and beams mitering from -60° to +60°. 

SHARK 512 SXI EVO, electrohydraulic semi-automatic band sawing machine to cut tubes, profiles and beams mitering from -60° to +60°. 

SHARK 652 SXI H 5.0, dual-column electrohydraulic semi-automatic band sawing machine to cut tubes, profiles and beams mitering from -60° to +60°. In the optional AUTOMATIC POSITIONING mode, saw head mitering is executed automatically. 

SHARK 652 SXI H 5.0 - AUTOMATIC MITERING, dual-column electrohydraulic semi-automatic band sawing machine to cut tubes, profiles and beams mitering from -60° to +60° - the saw head mitering is executed automatically. 

THOR 450, dual-column semi-automatic band sawing machine for 0° cuts of structural steels, with size up to 450x450 mm.

THOR 560, dual-column semi-automatic band sawing machine for 0° cuts of structural steels, with size up to 560x560 mm.

THOR 860, dual-column semi-automatic band sawing machine for 0° cuts of structural steels, with size up to 860x860 mm.

SHARK 281 NC 5.0, electrohydraulic automatic band sawing machine to cut metals mitering from 0° to +60°. In addition to the automatic cutting cycle, it can also operate in manual, semi-automatic/dynamic and semi-automatic modes. 

SHARK 331-1 NC 5.0 SPIDER, electrohydraulic automatic band sawing machine to cut metals mitering from 0° to +60°. In addition to the automatic cutting cycle, it can also operate in semi-automatic mode. 

SHARK 332-1 NC 5.0, electrohydraulic automatic band sawing machine to cut metals mitering from -45° to +60°. In addition to the automatic cutting cycle, it can also operate in manual, semi-automatic/dynamic and semi-automatic modes. 

SHARK 332 RC KONNECT, automatic electromechanical pivot band sawing machine with controlled automatic rotation to cut iron tubes, profiles and beams from -60° to +60°. In addition to the automatic operating cycle, it can also operate in semi-automatic mode. 

SHARK 230-1 NC HS 5.0, dual-column electrohydraulic automatic band sawing machine for 0° cuts of structural, stainless and alloy steels, solids and profiles. In addition to the automatic cycle, it can also operate in semi-automatic mode.

SHARK 350 NC HS 5.0, dual-column electrohydraulic automatic band sawing machine for 0° cuts of structural, stainless and alloy steels, solids and profiles. In addition to the automatic cutting cycle, it can also operate in semi-automatic mode. 

SHARK 350 CNC HS 4.0, dual-column electromechanical automatic band sawing machine for 0° cuts of structural, stainless and alloy steels, solids and profiles. In addition to the automatic cutting cycle, it can also operate in semi-automatic mode. 

SHARK 460 KONNECT, dual-column electromechanical automatic band sawing machine for 0° cuts of structural, stainless and alloy steels, solids and profiles. In addition to the automatic cutting cycle, it can also operate in semi-automatic mode. 

SHARK 660 CNC HS 4.0, dual-column electromechanical automatic band sawing machine for 0° cuts of structural, stainless and alloy steels, solids and profiles. In addition to the automatic cutting cycle, it can also operate in semi-automatic mode. 

FALCON 352, manual pull-down sawing machine to cut metals mitering from -45° to +45°, which can be supplied with or without a steel base. 

Upon request, it can be supplied with a pneumatic vice (MA) and automatic clamping when the saw head is pulled down.

FALCON 352 MA, manual pull-down sawing machine to cut metals mitering from -45° to +45°, is supplied with a steel base and two speeds motor. 

Furthermore it is supplied with a pneumatic vice (MA) and automatic clamping when the saw head is pulled down.

COBRA 352 MA, manual pivoting sawing machine with hard-metal teeth blade to cut light alloys, aluminium profiles and solids mitering from -45° to +45°.

The saw head is vertically adjustable to also perfom cuts with head tilting from 0° to +45°. 

COBRA 352 SX EVO, electropneumatic semi-automatic pivot sawing machine with hard-metal teeth blade to cut light alloys, aluminium profiles and solids mitering from -45° to +45°.

COBRA 352 NC 5.0, electropneumatic automatic sawing machine with electrowelded hard-metal blade to cut light alloys, aluminium profiles and solids mitering from -45° to +45°.  

The saw head is vertically adjustable to also perfom cuts with head tilting from 0° to +45°. 

TIGER 352, electropneumatic manual vertical circular sawing machine to cut metals mitering from -45° to +60°. Upon request, it is provided with a pneumatic vice (MA) manually activated through a switch.

TIGER 352 MA, electropneumatic manual vertical circular sawing machine to cut metals mitering from -45° to +60°, is provided with a pneumatic vice (MA) manually activated through a switch.

TIGER 352 SX EVO, electropneumatic semi-automatic vertical sawing machine with HSS disc to cut metals mitering from -45° to +60°.

TIGER 372 SX EVO, electropneumatic semi-automatic vertical sawing machine with HSS disc to cut metals mitering from -45° to +60°. 

TIGER 352 NC 5.0, electropneumatic automatic vertical circular sawing machine to cut metals mitering from -45° to +60°. In addition to the automatic cutting cycle, it can also operate in the semi-automatic mode.

TIGER 372 CNC LR 4.0, electropneumatic automatic circular sawing machine to cut steels mitering from -45° to +60°. In addition to the automatic cutting cycle, it can also operate in semi-automatic mode.
 

TIGER 372 CNC LR 4.0 RC, electropneumatic automatic circular sawing machine to cut steels mitering from -45° to +60°. In addition to the automatic cutting cycle, it can also operate in semi-automatic mode.  

TIGER 402 CNC HR 4.0, electropneumatic automatic circular sawing machine to cut aluminium and light alloys mitering from -45° to +60°. In addition to the automatic cutting cycle, it can also operate in semi-automatic mode. 
 

TIGER 402 CNC HR 4.0 RC, electropneumatic automatic circular sawing machine to cut aluminium and light alloys mitering from -45° to +60°. In addition to the automatic cutting cycle, it can also operate in semi-automatic mode.

VELOCEX 65, automatic circular sawing machine for 0° high-speed cuts of steels and alloys. 

VELOCEX 80, automatic circular sawing machine for 0° high-speed cuts of steels and alloys. 

VELOCEX 125, automatic circular sawing machine for 0° high-speed cuts of steels and alloys.