ADAPTATIVE SAW HEAD DOWN FEED RATE
Self-regulation in real-time of head down feed rate according to the type of material or blade wear.
SHARK 281 NC 5.0
Request informationStrength and versatility: the winning combination characterizing the automatic band sawing machine ideal for the cut of solids, but also mitering
- MITER CUTTING
- Metals
- Solid
SHARK 281 NC 5.0, electrohydraulic automatic band sawing machine to cut metals mitering from 0° to +60°. In addition to the automatic cutting cycle, it can also operate in manual, semi-automatic/dynamic and semi-automatic modes.
MAXIMUM PRODUCTION
> The four working modes (manual, semi-automatic/dynamic, semi-automatic and automatic ones) allow to perform any kind of cut in the most efficient way.
> The control allowing to store up to 100 cutting programs, each one with different quantities and lengths, minimizes programming time of regular jobs.
> The automatic acquisition of the saw head cutting start position reduces setting time.
> The cast-iron adjustable blade-guide heads with 4 CARBIDE pads ensure greater stability and longer blade life.
> The tank for the coolant collection allows to recover the coolant even when cutting at maximum angles, thus reducing waste to zero.
MAXIMUM PRECISION
> The bar feeder powered by stepper motor is a guarantee of high precision.
> The mechanical stops at 0°, +45° and +60° with locking device at all angles in between allow the quick positioning of the saw head.
> Angles scale engraved on the turning table allows to easily perform precise cuts in perfect tolerance at any angle.
> The 2.2 Kw motor with vector inverter for infinite variable blade speed from 15 to 100 m/min allows to adjust the band saw blade rotation speed according to the type of material.
BOOK A DEMONSTRATION SESSION: TEST OUR SAWING MACHINES PERSONALLY AND DISCOVER ALL METAL CUTTING TECHNOLOGIES.
OUR TECHNICAL STAFF WILL BE READY TO GIVE YOU PERSONALIZED ADVICE ACCORDING TO YOUR NEEDS!
INDUSTRY 4.0 ready - IOT
The optional IOT allows to maximize data collection and use them in favor of a better sawing machine cutting performance and longer blade life.
Technical data
 |
 |
 |
|
| 0° | 250 mm | 230 mm | 280 x 200 mm |
| + 45° | 190 mm | 180 mm | 180 x 180 mm |
| + 60° | 120 mm | 110 mm | 110 x 110 mm |
| Max. vice opening | 285 mm |
| Minimum cutting length | 10 mm |
| Rest piece no longer feeded | 260 mm |
| Band size | 2950 x 27 x 0.9 mm |
| Blade motor power | 2.2 Kw - Three-phase |
| Blade rotation speed | 15 ÷ 100 m/min |
Accessories
BI-METAL BAND SAW BLADE 2950x27x0.9 mm M42
Band saw blade: choose the appropriate tooth pitch according to the material to cut.
POWERED DREDGING CHIP CONVEYOR
Ideal to draw out from the sawing machine the chips generated during cutting by means of a set of steel blades dragging the chip deposit
5 L EMULSIFIABLE OIL PACK
Emulsifiable solution for cutting to lubricate and cool off the blade
KIT IoT - INDUSTRY 4.0 READY
It allows to maximize data collection and use them for a better use and cutting performance of the sawing machine as well as longer blade life.
MEPLAN: KIT MES
It is possible to add, manage and transfer production orders from the office directly to the sawing machines in the production department.
LASER PROJECTOR & WORK LIGHT
The laser projector projects a red beam on the material thus marking the cutting line, the work light illuminates the working area in a proper way.
VOLTAGE ADAPTION FOR 200-220V 50/60HZ THREE-PHASE
Adaption of some standard electrical components not suitable for v.220 50/60Hz three-phase
VICE PRESSURE REGULATOR
It allows the vice pressure adjustment according to the section of the material to cut
SUPPLEMENTARY FOOT PEDAL CONTROL WITH EMERGENCY STOP
Ideal to start various functions of the machine and/or to stop them in case of emergency
HYDRAULIC OVERHEAD BUNDLINGS FOR BUNDLE CUTTING
Ideal to properly clamp a bundle of bars on band sawing machines both on a single and multiple row up to a maximum capacity of 170x130 mm
SPRAY MIST SYSTEM
The system sprays off a small amount of cutting oil on the band saw blade body, thus minimizing the waste of oil during the working phase.
ADAPTER FOR UNLOADING TABLE WITH SUPPORT
It allows to connect MEP tables to the sawing machines so that the material is always guided and supported properly, thus creating a single cutting line.
Material handling system
Our standard models have been designed and manufactured in order to offer maximum flexibility of use, so that they can change and transform over time, thus optimizing their use according to the nature of the operations of any sector and market around the world. DO OUR STANDARD MODELS NOT FULLY MEET YOUR NEEDS? Our team of experts will study and examine your needs, with evaluations also on site, to ensure optimal study and layout proposals that meet your most specific needs, even with custom models. Constantly updated on the latest industry news, our team will develop cutting-edge solutions by studying innovative formulas that are in line with the highest industry standards.
Learn more