CAST-IRON STRUCTURE
Cast-iron structure to absorb vibrations and ensure greater cutting stability and longer blade life.
The unrivaled automatic sawing machine in terms of extreme technology and cutting performance
SHARK 350 CNC HS 4.0, dual-column electromechanical automatic band sawing machine for 0° cuts of structural, stainless and alloy steels, solids and profiles. In addition to the automatic cutting cycle, it can also operate in semi-automatic mode.
ABSOLUTE EFFICIENCY
> The two working modes (semi-automatic and automatic ones) allow to perform any kind of cut in the most efficient way.
> The control allowing to store up to 300 cutting programs, each one with different quantities and lengths, minimizes programming time of regular jobs.
> The automatic acquisition of the saw head cutting start position reduces programming time.
> The automatic alignment of the front blade guide head according to the dimensions of the bars to cut reduces setting time.
> The blade tensioning through electronic transducer is constantly checked and adjusted in real-time, thus granting a higher cutting precision and longer blade life.
> The OPTIONAL blade deviation control device allows to perform cuts always in perfect tolerance.
EXCEPTIONAL FLEXIBILITY
> The bar feeder with single stroke 600 mm is repeatable to cut at any length.
> The feeder clamping unit is floating and self-aligning to feed also non-straight bars.
> The pair of vertical rollers allows to contain and align any kind of bar or bundle while feeding.
> The vector inverter for infinite variable blade speed from 15 to 115 m/min allows to adjust the saw blade rotation speed according to the type of material.
> The motorized chip collector can be assembled to both the right and the left of the sawig machine.
BOOK A DEMONSTRATION SESSION: TEST OUR SAWING MACHINES PERSONALLY AND DISCOVER ALL METAL CUTTING TECHNOLOGIES.
OUR TECHNICAL STAFF WILL BE READY TO GIVE YOU PERSONALIZED ADVICE ACCORDING TO YOUR NEEDS!
Cast-iron structure to absorb vibrations and ensure greater cutting stability and longer blade life.
Motion of the saw head powered by a brushless motor for an auto-check of all data set/recorded so as to adjust cutting parameters in real-time, counterbalancing through a hydraulic cylinder to give the machine cutting stability, and Ø 40mm ball bearings screw nut that ensures a mechanical vibration reduction during the cut.
Motion of the saw head on linear guides with preloaded ball screw slides that ensures a mechanical vibration reduction during the cut and greater cutting stability.
The material library allows the automatic setting of the blade speed (S) and head down feed rate (F) according to the type of material.
From the extendable material library, you can choose the type and the geometry of the material, the hardness and the type of blade. Accordingly, the control sets the right blade speed and head down feed rate.
The optional IOT allows to maximize data collection and use them in favor of a better sawing machine cutting performance and longer blade life.
![]() |
![]() |
|
0° | 350 mm | 350 mm |
Max. vice opening | 355 mm |
Minimum cutting length | 10 mm |
Rest piece no longer feeded | 130 mm |
Band size | 4640 x 34 x 1.1 mm |
Blade motor power | 5.5 Kw - Three-phase |
Blade rotation speed | 15 ÷ 115 m/min |
Inverter power | 11 Kw |