TIGER 372 CNC LR 4.0 RC

Request information

TIGER 372 CNC LR 4.0 RC, electropneumatic automatic circular sawing machine to cut steels mitering from -45° to +60°. In addition to the automatic cutting cycle, it can also operate in semi-automatic mode.  

ABSOLUTE EFFICIENCY

> The two working modes (semi-automatic and automatic ones) allow to perform any kind of cut in the most efficient way. 

> The control allowing to store up to 300 cutting programs, each one with different quantities and lengths, minimizes programming time of regular jobs. 

> The automatic acquisition of the saw head cutting start position reduces setting time. 

> The clamping unit, which is equipped with both two hydraulic pneumatic cutting-off vices sliding on the left and right side of the blade and a vertical vice, ensures an efficient and safe clamping of the material even in case of tube cutting, thus granting a burr-free cut. 

> The three-stage gear transmission allows to perform high-speed cuts, thus ensuring longer blade life.

> The brushless motor for the programmable automatic rotation of the saw head mitering between -45° and +60° coupled with the encoder reader allow a precise control in speed, torque and positioning - tolerance 1'.

 

EXCEPTIONAL FLEXIBILITY

> The bar feeder with single stroke 1000 mm is repeatable to cut at any length.

> The vector inverter for infinite variable blade speed from 15 to 150 rpm allows to adjust the saw blade rotation speed according to the type of material. 

> The material library allows the automatic setting of the blade speed (S) and head down feed rate (F) according to the type of material. Moreover, from the extendable material library, you can choose the type and the geometry of the material, the hardness and the type of blade. Accordingly, the control sets the right blade speed and head down feed rate.

 

 


 

BOOK A DEMONSTRATION SESSION: TEST OUR SAWING MACHINES PERSONALLY AND DISCOVER ALL METAL CUTTING TECHNOLOGIES.

OUR TECHNICAL STAFF WILL BE READY TO GIVE YOU PERSONALIZED ADVICE ACCORDING TO YOUR NEEDS!

 


 

TIGER 372 CNC LR 4.0 RC
TIGER 372 CNC LR 4.0 RC
TIGER 372 CNC LR 4.0 RC
TIGER 372 CNC LR 4.0 RC
  • ADAPTATIVE SAW HEAD DOWN FEED RATE

    Self-regulation in real-time of head down feed rate according to the type of material that grants a great surface finishing in any working condition, even in case of blade wear.

  • MOTION OF THE SAW HEAD ON LINEAR GUIDES

    Motion of the saw head powered by a servo motor on linear guides with preloaded ball screw slides on ball screw nut. 
    Auto-check of all data set/recorded so as to adjust cutting parameters in real-time, thus granting cutting stability and a mechanical vibration reduction during the cut. 

     

     

  • CAST-IRON STRUCTURE

    Cast-iron structure to absorb vibrations and ensure greater cutting stability and longer blade life.

  • INDUSTRY 4.0 ready - IOT

    The optional IOT allows to maximize data collection and use them in favor of a better sawing machine cutting performance and longer blade life. 

  • Technical data

    Cutting range - dimensions obtained with optimized use of the supplied jaw set  
      Ø
    370 110 mm 95 mm 180 x 95 mm  
    + 45° 370 80 mm 80 mm   80 x 95 mm
    + 60° 370 30 mm 30 mm   30 x 85 mm
    - 45° 370 55 mm 55 mm   55 x 80 mm

     

    Cutting range - with pair of long movable jaws  
      Ø
    370 110 mm 95 mm 180 x 95 mm 70 x 100 mm
    + 45° 370 60 mm 65 mm   60 x 95 mm
    + 60° 370 25 mm 25 mm   25 x 85 mm
    - 45° 370 35 mm 35 mm   35 x 80 mm

     

    Cutting range - with pair of medium movable jaws  
      Ø
    370 110 mm 95 mm 180 x 95 mm 70 x 100 mm
    + 45° 370 65 mm 65 mm   65 x 95 mm
    + 60° 370 25 mm 25 mm   25 x 85 mm
    - 45° 370 40 mm 40 mm   40 x 80 mm

     

    Cutting range - with pair of short movable jaws  
      Ø
    370 110 mm 95 mm 180 x 95 mm 70 x 100 mm
    + 45° 370 75 mm 75 mm   75 x 95 mm
    + 60° 370 30 mm 30 mm   30 x 85 mm
    - 45° 370 50 mm 50 mm   50 x 80 mm

     

    Max. vice opening 190 mm
    Rest piece no longer feeded 260 mm

     

    Circular blade size HSS 370 x 32 x 3 mm
    Blade motor power 5.5 Kw - Three-phase
    Blade rotation speed 15 ÷ 150 rpm

     

    Cutting system to cut beams and bundles of metal tubes | © MEP S.p.A. - Circular and band sawing machines to cut metals

    Material handling system

    Our standard models have been designed and manufactured in order to offer maximum flexibility of use, so that they can change and transform over time, thus optimizing their use according to the nature of the operations of any sector and market around the world. DO OUR STANDARD MODELS NOT FULLY MEET YOUR NEEDS? Our team of experts will study and examine your needs, with evaluations also on site, to ensure optimal study and layout proposals that meet your most specific needs, even with custom models. Constantly updated on the latest industry news, our team will develop cutting-edge solutions by studying innovative formulas that are in line with the highest industry standards.
    Learn more