ADAPTATIVE SAW HEAD DOWN FEED RATE
Self-regulation in real-time of head down feed rate according to type of material or blade wear.
COBRA 352 NC 5.0
Request informationThe automatic circular sawing machine ideal for cutting aluminium, easy to use and extremely flexible
- MITER CUTTING
- Light alloys
- Tubes, profiles and extruded profiles
COBRA 352 NC 5.0, electropneumatic automatic sawing machine with electrowelded hard-metal blade to cut light alloys, aluminium profiles and solids mitering from -45° to +45°.
The saw head is vertically adjustable to also perfom cuts with head tilting from 0° to +45°.
MAXIMUM PRODUCTION
> The cast-iron structure absorbs vibrations and ensures greater cutting stability and longer blade life.
> The control allowing to store up to 100 cutting programs, each one with different quantities and lengths, minimizes programming time of regular jobs.
> The automatic acquisition of the saw head cutting start position reduces setting time.
> The automatic coolant spray mist device, actived only when the cycle starts so as to avoid waste, ensures an excellent blade cooling and longer life.
MAXIMUM PRECISION
> The bar feeder powered by stepper motor is a guarantee of high precision.
>The turning cutting table is assembled on a central pin and thrust bearing thus allowing an easy and smooth rotation at any angle and turning along with the saw head thus preventing to cut it through.
> Angles scale engraved on the turning platform allows to easily perform precise cuts in perfect tolerance at any angle.
> The mechanical stops at -45°, 0° and +45° with locking device at all angles in between allow the precise positioning of the saw head.
> The clamping unit, which is equipped with both two front pneumatic vices freely positionable along the longitudinal axis of the pieces and a vertical vice, ensures an efficient and safe clamping even if case of tube cutting.
BOOK A DEMONSTRATION SESSION: TEST OUR SAWING MACHINES PERSONALLY AND DISCOVER ALL METAL CUTTING TECHNOLOGIES.
OUR TECHNICAL STAFF WILL BE READY TO GIVE YOU PERSONALIZED ADVICE ACCORDING TO YOUR NEEDS!
INDUSTRY 4.0 ready - IOT
The optional IOT allows to maximize data collection and use them in favor of a better sawing machine cutting performance and longer blade life.
TILTING HEAD
The sawing machine cuts light alloys, aluminium profiles and solids from -45° to +45°. The saw head is vertically adjustable to also perfom cuts with head tilting from 0° to +45°.
Technical data
 |
 |
 |
 |
|
| 0° | 120 mm | 105 mm | 180 x 70 mm | 80 mm |
| - 45° | 110 mm | 95 mm | 135 x 60 mm | 55 mm |
| + 45° | 120 mm | 100 mm | 135 x 60 mm | 55 mm |
| Max. vice opening | 180 mm |
| Circular blade size | HM 350 x 32 x 3.4 mm |
| Blade motor power | 2.6 / 3.5 Kw - Three-phase |
| Blade rotation speed | 1700 / 3400 rpm - 2 Speeds |
Accessories
CIRCULAR BLADE HM TCT Ø 350x32x3.4 mm POSITIVE RAKE, SILENCED AND BALANCED
High speed circular saw blade. Ideal to cut non-ferrous materials.
CIRCULAR BLADE HM TCT Ø 350x32x3.4 mm NEGATIVE RAKE
High speed circular saw blade. Ideal to cut non-ferrous materials.
5 L EMULSIFIABLE OIL PACK
Emulsifiable solution for cutting to lubricate and cool off the blade
CHIP COLLECTOR TURBO 2500
Ideal to collect the aluminium chips generated during the cut
KIT IoT - INDUSTRY 4.0 READY
It allows to maximize data collection and use them for a better use and cutting performance of the sawing machine as well as longer blade life.
MEPLAN: KIT MES
It is possible to add, manage and transfer production orders from the office directly to the sawing machines in the production department.
SPECIAL VICE TO REDUCE REMNANT
Ideal to reduce remnant of the material no longer fed
SET OF NYLON COMB JAWS TO REDUCE REMNANT
Set of hexagonal teflon jaws for bundle cutting to reduce remnant of the material no longer fed - max capacity 75x75 mm.
SUPPLEMENTARY FOOT PEDAL CONTROL WITH EMERGENCY STOP
Ideal to start various functions of the machine and/or to stop them in case of emergency
SET OF NYLON COMB JAWS
Set of hexagonal teflon jaws for bundle cutting - max capacity 75x75 mm
KIT FOR DOUBLE SUCTION
Double junction point for chip suction
SPRAY MIST SYSTEM
The system sprays off a small amount of cutting oil on the band saw blade body, thus minimizing the waste of oil during the working phase.
ADAPTER FOR UNLOADING TABLE
It allows to connect MEP tables to the sawing machines so that the material is always guided and supported properly, thus creating a single cutting line.
Material handling system
Our standard models have been designed and manufactured in order to offer maximum flexibility of use, so that they can change and transform over time, thus optimizing their use according to the nature of the operations of any sector and market around the world. DO OUR STANDARD MODELS NOT FULLY MEET YOUR NEEDS? Our team of experts will study and examine your needs, with evaluations also on site, to ensure optimal study and layout proposals that meet your most specific needs, even with custom models. Constantly updated on the latest industry news, our team will develop cutting-edge solutions by studying innovative formulas that are in line with the highest industry standards.
Learn more