HYDRAULIC POSITIVE HEAD DOWN FEED RATE AND VICE CONTROL
Hydraulic system to control both the vice and head down feed rate that grants a constant pressure during the cut according to the feed set by the operator.
The semi-automatic band sawing machine that makes the difference in terms of cutting quality and reliability
SHARK 382-1 SXI EVO, electrohydraulic semi-automatic band sawing machine to cut metals mitering from -45° to +60°. In addition to the semi-automatic cycle, it can also operate in manual and semi-automatic/dynamic modes.
> The three working modes (manual, semi-automatic/dynamic and semi-automatic ones) allow to perform any kind of cut in the most efficient way.
> The main control with acustic commands is assembled on an articulated arm thus granting full control in all operational status.
> The LCD display shows the status of the sawing machine and all its parameters thus allowing maximum control in real-time.
> Programming from the control panel also allows to adjust the saw head stroke limits according to the dimensions of the bars to cut.
> The mechanical stops at -45°, 0°, +45° and +60° are equipped with a locking device at all angles in between.
> The knurled steel jaws of the cutting vice allow an efficient and safe clamping even in the case of tube cutting.
> The large working surface granting maximum cutting stability and safety is equipped with hardened steel plates which can be replaced in case of wear.
> The turning cutting table is assembled on a central pin and roller thrust bearing thus allowing an easy and smooth rotation at any angle and turning along with the saw head thus preventing to cut it through.
> Angles scale engraved on the turning table allows to easily perform precise cuts in perfect tolerance at any angle.
> The quick releasing clamping system allows to manually open/close the vice in an easy way.
> The clamping unit sliding longitudinally to the right and left of the saw head allows to safely perform even precise angle cuts.
> The coolant flood underneath the cutting table avoids the accumulation of chips and downtimes during the chip removal.
> A user-friendly interface with display and mechanical buttons ensures a reliable, easy and intuitive programming.
BOOK A DEMONSTRATION SESSION: TEST OUR SAWING MACHINES PERSONALLY AND DISCOVER ALL METAL CUTTING TECHNOLOGIES.
OUR TECHNICAL STAFF WILL BE READY TO GIVE YOU PERSONALIZED ADVICE ACCORDING TO YOUR NEEDS!
|0°||300 mm||250 mm||380 x 250 mm|
|+ 45°||260 mm||250 mm||300 x 200 mm|
|+ 60°||180 mm||170 mm||200 x 170 mm|
|- 45°||240 mm||210 mm||280 x 160 mm|
|Max. vice opening||385 mm|
|Band size||3770 x 27 x 0.9 mm|
|Blade motor power||1.5 / 1.8 kw - Three-phase|
|Blade rotation speed||40 / 80 m/min - 2 Speeds|