SHARK 652 SXI H 5.0

Request information

SHARK 652 SXI H 5.0, dual-column electrohydraulic semi-automatic band sawing machine to cut tubes, profiles and beams mitering from -60° to +60°. In the AUTOMATIC POSITIONING mode (OPTIONAL), saw head mitering is executed automatically. 

GREAT EFFICIENCY

> The automatic setting of the saw head upper position by means of a laser projector reduces programming time. 

> The automatic alignment of the front blade guide head according to the dimension of the material to cut reduces setting time of the sawing machine. 

> The hydraulic clamping system is equipped with two independent vices on the left and on the right of the saw blade, thus allowing to safely execute precise and burr-free angle cuts. 

> The coolant flood underneath the cutting table avoids the accumulation of chips and downtimes during the chip removal. 

> The vector inverter for infinite variable blade rotation speed from 15 to 150 m/min allows to adjust the saw blade rotation speed according to the type of material.

 

EXCEPTIONAL FLEXIBILITY

> The electromechanical servo system for the dynamic blade tensioning allows its continuous self-adjustment, thus ensuring greater cutting precision and longer blade life. 

> The OPTIONAL system of hydraulic pop-up rollers lifts the bar from the working surface to avoid any kind of contact with the material during loading and unloading.

> The adaptative saw head feed force according to the resistance encountered by the blade during the cut allows to perform cuts with excellent finishing in any condition, even in case of worn-out blade. 

> The junction between the cutting vice and the vertical support of the front blade guide head reduces setting time of the sawing machine, thus allowing their automatic positioning according to the section to cut.

 

 


 

BOOK A DEMONSTRATION SESSION: TEST OUR SAWING MACHINES PERSONALLY AND DISCOVER ALL METAL CUTTING TECHNOLOGIES.

OUR TECHNICAL STAFF WILL BE READY TO GIVE YOU PERSONALIZED ADVICE ACCORDING TO YOUR NEEDS!

 


 

SHARK 652 SXI H 5.0
SHARK 652 SXI H 5.0
SHARK 652 SXI H 5.0
SHARK 652 SXI H 5.0
SHARK 652 SXI H 5.0
  • SAW HEAD MANUAL MITERING

    Cutting angle is set by manual mitering of the saw head through a handle and servo control for hydraulic locking. 

    Cutting angle showed on the display. 

     

  • SAW HEAD AUTOMATIC MITERING

    With the optional AUTOMATIC POSITIONING (cutting angle programming from control panel with hydraulic locking of the saw head), the cutting angle is reached by means of a rack and chain transmission.  

     

    Two cutting cycles are available:
    A) automatic cycle for single angle cuts;
    B) automatic cycle for 2 angles cuts to be executed alternatively. 

  • CAST-IRON STRUCTURE

    Cast-iron structure to absorb vibration and ensure maximum cutting stability and longer blade life.

  • MOTION OF THE SAW HEAD ON LINEAR GUIDES WITH PRELOADED BALL SCREW SLIDES

    Motion of the saw head on linear guides with preloaded ball screw slides, powered by two hydraulic cylinders: 3-degree canted saw head suitable to cut the horizontal sides of bars or bundles. 

  • DESIGN ALLOWING COMPLETE RECOVERY OF THE COOLANT

    Base and turning table designed to allow both a better chip removal from the working table and complete recovery of the coolant. 

  • Technical data

     
    450 mm 450 mm 650 x 450 mm
    + 45° 400 mm 400 mm 400 x 450 mm
    + 60° 250 mm 250 mm 250 x 450 mm
    - 45° 400 mm 400 mm 400 x 450 mm
    - 60° 250 mm 250 mm 250 x 450 mm

     

    Max. vice opening 650 mm

     

    Band size 6700 x 41 x 1.3 mm
    Blade motor power 9.2 Kw - Three-phase
    Blade rotation speed 15 ÷ 150 m/min

     

    Digitalization

    Continuous real-time digital workflows in planning and preparation, production and monitoring, maintenance and service that drive operations and processes to maximum efficiency. Optimize productive activities, from order launch to finished product! The multilingual Web platform PRODUCTION-SYS, also available in Cloud, detects all information related to the production cycle and monitors production in real time, thus facilitating the management and control of the production functions related to sawing machines and more.
    Learn more
    Cutting system to cut beams and bundles of metal tubes | © MEP S.p.A. - Circular and band sawing machines to cut metals

    Material handling system

    Our standard models have been designed and manufactured in order to offer maximum flexibility of use, so that they can change and transform over time, thus optimizing their use according to the nature of the operations of any sector and market around the world. DO OUR STANDARD MODELS NOT FULLY MEET YOUR NEEDS? Our team of experts will study and examine your needs, with evaluations also on site, to ensure optimal study and layout proposals that meet your most specific needs, even with custom models. Constantly updated on the latest industry news, our team will develop cutting-edge solutions by studying innovative formulas that are in line with the highest industry standards.
    Learn more