CAST-IRON STRUCTURE
Cast-iron structure of the saw head, cutting table and vice to absorb vibrations during the cut and ensure longer blade life.
The manual double miter pull-down sawing machine performing single cuts even without operator
SHARK 332-1 CCS, band sawing machine to cut metals mitering from -45° to +60°. In addition to the manual pull-down mode, it can also perform single cuts without operator.
HEAVY-DUTY
> The double spring to handle the saw head ensures maximum rigidity of movement.
> The cast-iron slide for the blade tensioning ensures an easy regulation and a smooth sliding over time.
> The high flow pump for the coolant ensures a constant blade lubrication and cooling.
> The knurled steel jaws of the cutting vice allow an efficient and safe clamping even in the case of tube cutting.
> The large working surface granting maximum cutting stability and safety is equipped with hardened steel plates which can be replaced in case of wear.
EXCEPTIONAL FLEXIBILITY
> The turning cutting table is assembled on a central pin and roller thrust bearing thus allowing an easy and smooth rotation at any angle and turning along with the saw head thus preventing to cut it through.
> Angles scale engraved on the turning table allows to easily perform precise cuts in perfect tolerance at any angle.
> The quick releasing clamping system allows to manually open/close the vice in an easy way.
> The clamping unit sliding longitudinally to the right and left of the saw head allows to safely perform even precise miter cuts.
> The coolant flood underneath the cutting table avoids the accumulation of chips and downtimes during the chip removal.
> Mechanical stops at -45°, 0°, +45° and +60° with a locking device at all angles in between.
BOOK A DEMONSTRATION SESSION: TEST OUR SAWING MACHINES PERSONALLY AND DISCOVER ALL METAL CUTTING TECHNOLOGIES.
OUR TECHNICAL STAFF WILL BE READY TO GIVE YOU PERSONALIZED ADVICE ACCORDING TO YOUR NEEDS!
Cast-iron structure of the saw head, cutting table and vice to absorb vibrations during the cut and ensure longer blade life.
Adjustable and extremely wear-resistant hard metal blade-guide pads that ensure longer blade life and cutting stability.
The CCS system allows to perform single cuts without operator - Saw head down feed rate by gravity: the cutting of the material is executed in automatic mode once the operator starts the cycle.
0° | 300 mm | 250 mm | 330 x 250 mm |
+ 45° | 260 mm | 250 mm | 260 x 200 mm |
+ 60° | 180 mm | 170 mm | 170 x 170 mm |
- 45° | 240 mm | 210 mm | 240 x 160 mm |
Max. vice opening | 335 mm |
Band size | 3650 x 27 x 0.9 mm |
Blade motor power | 1.5 / 1.8 Kw - Three-phase |
Blade rotation speed | 40 / 80 m/min - 2 Speeds |